Comprehensive Insights on Assessment Validation and Validating Assessments

Comprehensive Insights on Assessment Validation and Validating Assessments

Blog Article

Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.

Even though we've covered validation in depth, let’s revisit its definition. ASQA defines validation as a quality review of the assessment process.

Put simply, validation checks which parts of an RTO's assessment process are accurate and spots areas for enhancement. A proper understanding of its main elements can make validation less daunting.

As per the 2015 SRTOs Clause 1.8, RTOs are required to ensure their assessment systems, including RPL, meet training package requirements and follow the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.

The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.

Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.

A Look at the Two Types of Assessment Validation

Breaking Down Assessment Validation

As discussed earlier and in our prior blogs, validation involves two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.

Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

This piece will highlight assessment tool validation.

Steps to Perform Assessment Tool Validation

After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.

Best Times to Conduct Assessment Tool Validation

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

Yet, this is not the only occasion to conduct this type of validation. Perform assessment tool validation when you:

- updating your resources
- new training products are added on scope
- course gets reviewed against training product updates
- when learning resources are identified as a risk during your risk assessment

ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.

Identifying Training Products for Validation

Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.

Starting Assessment Tool Validation: What You Need

Training Materials

Given that you are conducting assessment tool validation, you will need the full array of your learning resources:

Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.

Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.

Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – these could be checklists, registers, and templates created separately from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Team for Validation

Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.

As a whole, your validation panel must have:

Vocational competencies and current industry skills applicable to the unit being validated

Up-to-date expertise and skills in vocational teaching and learning

Any one of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its updated version

Assessment validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool is beneficial for both the validation process and documentation. It makes it easier to understand how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates can be found online. These tools often have validators review the tools as a whole to verify if they meet the principles of assessment.

Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates simplify the validation process, they can introduce judgment errors because there is insufficient space for comments on each assessment item.

A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?

As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Core Principles of Assessment
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?

Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?

Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment produce the same results every time, regardless of who conducts the training? Will different assessors consistently decide on skill competence?

Core Rules of Evidence

Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work belongs to the candidate?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:

Follow Through with Actions

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

nappy changing

prepare bottles, feed babies from bottles, and clean equipment

prepare solid food and feed babies

respond to infant signs and cues appropriately

prepare and settle babies for rest

monitor and encourage age-appropriate physical exploration and gross motor skills

Getting students to describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

All or Nothing

Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Give More Specificity

Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students get more info or assessors. For example:
What kind of information can be included in a work package?
What information can be included in a work package?

Answers can include:

Required materials

Relevant costs

Time assigned for activities

Assigned functions and responsibilities

When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.

This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:

Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolation of work area, engineering controls, personal protective equipment

Work area and ground conditions – eliminating hazards, isolating, engineering controls

People – isolating, use of engineering controls, administrative controls

Structural hazards – substituting, isolation, engineering

Chemical hazards – isolation, use of engineering controls, administrative controls

Equipment or machinery – isolating, use of engineering controls, administration

Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.